Infrared > Infrared > ConnectingBlocks > XLIP232
XLIP232
IP-RS232 Connecting Block
(+) Larger Image

XLIP200 modules will typically be setup as a source (receiver) and a destination (emitter) in a two (or more) module system with at least one module setup as a receiver and at least one module setup as an emitter to receiver, transmit and output IR.

In receiver mode, with an external IR receiver connected, the XLIP200 will receive an IR command, convert it to packet data and send that data to a pre-determined IP address, typically another XLIP200 in emitter mode.

n emitter mode, the XLIP200 will decode the received data and output IR, as originally received, via a connected IR emitter.

Depending on configuration, one XLIP200 in receiver can send data to multiple XLIP200s in emitter mode, or multiple XLIP200s in receiver mode can send data to a single XLIP200 in emitter mode.

XLIP232 inludes the same features as XLIP200 with RS232 Commands.

XLIP232 Modules will typically be setup as a source (server) and a destination (client) in a two or more module system. Depending on configuration, one XLIP232 in receiver/ server can send data to multiple XLIP232’s in emitter/client mode, or multiple XLIP232’s in receiver/server mode can send data to a single XLIP232 in emitter/client mode

Data Sheet


Xantech IR Utility
Xantech-IR_v2.24.zip
 


Associated Products
XLIP200
IP-IR Connecting Block
XLIP800
Web Intelligent Controller