The 590-10 gives the custom installer the ability to use any push button or contact closure to initiate infrared commands. The 590-10 incorporates 16 isolated input circuits and a learning microprocessor. There are 16 pairs of screw terminals on its rear panel for use with up to 16 individual contact closures.

FEATURES

• Programmable with Universal Dragon Drop-IR™ Programming Software
  
• Multi-function sequencing for up to 40 commands per key, button, or contact closure
  
• Infrared output compatible with all Xantech brand IR control systems.
  Use 791-44 connecting blocks for emitter expansion
  
• Memory: 8 Kbytes E2PROM
  
• IR Carrier Frequency: 31.25 kHz to 71.50 kHz
  
• Maximum Peak IR Signal Output Current: 100 milliamps
  
• COM Port: RS232 Signal Compatible
  
  SPECIFICATIONS
  
• Inputs: 16 Opto-Isolators connected via 16 screw terminal pairs,
  each in series with a 1,000-Ohm resistor
  
• Input voltage range, 5 to 30 VDC
  
• 12 VDC is available on the 12VDC �+" and �-" screw terminals
  for driving inputs through external switch closures
  
• Banks: One with extensive macro (sequence) capacity
  
• Power In: 12VDC, 300mA. 2.1mm coaxial power jack, center
  positive. Requires Model 782-00 or 786-00 Power Supply
  
• Memory: 8 kilobyte non-volatile E2PROM
  
• IR Carrier Frequency: 31.25kHz to 71.50kHz
  
• Dimensions/Weight: 8.5"W x 4.25"H x 2.875"D (216mm x108mm x 73mm) / 1.8 lbs (0.8 kg)